|
Cam belt |
|
|
|
|
Cam Belt Tensioner Kit
Includes:
- 1 x 145807 (Supersedes: 132479, 144555)
- 1 x 149791 (Supersedes: 132499, 144557)
- 1 x 132843
(348: All) |
34815095 |
£209.83 |
|
|
Timing/Cam Belt
(348: All) |
132843 |
£19.85 |
|
|
Cam Belt Gear Pulley
Aftermarket
(348: 2.7 Motronic, TB/S) |
144488/A |
£228.75 |
|
|
Cam Belt Tensioner Set
Uprated Aluminum
Includes:
- 1 x 145807 (Supersedes: 132479, 144555)
- 1 x 149791 (Supersedes: 132499, 144557)
(348: All) |
34815020 |
£193.95 |
|
|
Uprated Cam Belt Tensioner Set
Recommended & used worldwide by countless independent Ferrari workshops
Utilises vastly higher rated bearings than of the OEM design
Over 40% reduction in weight of the outer bearing carrier (128g vs OEM's 220g)
Includes:
- 1 x 145807 (Supersedes: 132479, 144555)
- 1 x 149791 (Supersedes: 132499, 144557)
(348: All) |
PT-348
 |
£240.00 |
|
|
Timing Belt Drive Pulley Bearing
1 required
Supersedes: 132500, 144690
(348: 2.7 Motronic, TB/S) |
170787
|
£85.00 |
|
 |
Timing Belt Drive Pulley Snap Ring
(348: 2.7 Motronic, TB/S)
|
11060576 |
£1.12 |
|
 |
Timing Belt Drive Pulley Washer
(348: 2.7 Motronic, TB/S)
|
133377 |
£12.16 |
|
 |
Timing Belt Pulley Dowel
With Threaded Centre
(348: 2.7 Motronic, TB/S) |
4146769 |
£12.30 |
|
 |
Timing Belt Tensioner Spring
(348: 2.7 Motronic, TB/S) |
148356 |
£39.96 |
|
 |
Timing Pulley Shaft Bearing
(348: TB/S) |
185343 |
£5.97 |
|
 |
Cam Belt Guide Shoe
(348: 2.7 Motronic, TB/S) |
133824 |
£168.00 |
|
|
|
|
|
|
|
Timing Belt Cover |
|
|
|
|
Timing Belt Cover Set
Black plastic
Complete with the following:
1 x 134216 - Front Timing Belt Cover
1 x 134217 - RH Rear Timing Belt Cover
1 x 134218 - LH Rear Timing Belt Cover
1 x 134219 - RH Top Timing Belt Cover
1 x 134220 - LH Top Timing Belt Cover
(348: All)
|
34815090 |
£396.78 |
|
|
|
|
|
|
|
idler |
|
|
|
|
Idler Bracket
(348: All) |
147132
|
£325.00 |
|
|
|
|
|
|
|
valves |
|
|
|
| |
All our inlet and exhaust valves are manufactured from top grade Austinetic 214N Stainless Steel.
All exhaust valves are Double-forged and, where necessary, Stellite-tipped with Stellite 12H and seats with Stellite 6H.
Finally, all valves are Pulse Plasma Nirtrided. |
|
 |
|
Inlet Valve
Original
32.50mm Head size
(348: 2.7 Motronic, TB/S) |
155131 |
£40.12 |
|
|
Inlet Valve
Original
30.40mm Head size
(348: 2.7 Motronic, TB/S) |
137955 |
£169.27 |
|
|
Inlet Valve (Pattern)
30.40mm Head size
(348: 2.7 Motronic, TB/S) |
137955-S |
£49.63 |
|
| |
|
|
|
|
 |
|
Exhaust Valve
Original
(348: 2.7 Motronic, TB/S) |
137959 |
£140.48 |
|
|
Exhaust Valve (Pattern)
(348: 2.7 Motronic, TB/S) |
137959-S |
£42.00 |
|
| |
|
|
|
|
|
Valve guides |
|
|
|
|
Inlet Valve Guide
(348: 2.7 Motronic, TB/S) |
117563 |
£36.88 |
|
|
Exhaust Valve Guide
(348: 2.7 Motronic, TB/S) |
117565 |
£36.84 |
|
|
|
|
|
|
|
valve springs |
|
|
|
|
Valve Springs (Per pair of 2 x inner spring and 2 outer springs)
Includes:
- 2 x Inner springs 117558
- 2 x Outer springs 117559
(348: All)
|
FER15010 |
£24.95 |
|
|
|
|
|
|
|
valve spring retainerS |
|
|
|
| |
|
|
|
|
 |
Upper Valve Spring Seat
(348: 2.7 Motronic, TB, TS)
|
117567 |
£24.07 |
|
 |
Valve Spring Seat
(348: 2.7 Motronic, TB, TS)
|
117568 |
£4.98 |
|
| |
|
|
|
|
|
Valve shims |
|
|
|
 |
|
| |
|
|
|
|
|
Valve Shim Removal Tool
Set:
- Hardened & ground bucket tool with serrated finger grips
- Blacked Chrome Vanadium Steel lever tool
Supersedes: 95979560
|
AS9560 |
£92.00 |
|
|
|
|
|
|
|
Valve seals |
|
|
|
|
Valve Stem Oil Seal
Rubber
Supersedes: 117282, 141565
(348: 2.7 Motronic, TB/S) |
119051 |
£2.69 |
|
|
Valve Stem Oil Seal
Teflon
(348: 2.7 Motronic, TB/S) |
119051T |
£3.82 |
|
 |
Valve Seal Tool for 7mm diameter valve guide
Designed to overcome the problem of correctly installing valve stem seals. The seal is simply inserted onto the tool (see enlarged picture) and the tool is then inserted into the valve guide. The seal is now perfectly square to the location diameter and with a small amount of pressure on the end of the tool, the seal is installed effortlessly, without damage and right first time.
(348: All) |
VST-02
|
£55.00 |
|
|
|
|
|
|
|
valve collets |
|
|
|
|
Valve Spring Collet
(348: 2.7 Motronic, TB/S) |
117283 |
£2.79 |
|
|
|
|
|
|
|
cam followers |
|
|
|
|
Cam Follower
(348: All)
|
117562 |
£24.86 |
|
|
|
|
|
|
|
cam bearing cap fixings |
|
|
|
|
Cam Bearing Cap Stud
High Tensile EN24T
Supersedes: 4146790, 4146561, 102754
(348: 2.7 Motronic, TB/S) |
102735/A |
£7.26 |
|
|
|
|
|
|
| |
Cam Cover |
|
|
|
 |
Wrinkle Finish High Temperature Paint
BLACK
Pressurised aerosol, UK shipment only
|
FER01015B |
£12.95 |
|
Wrinkle Finish High Temperature Paint
RED
Pressurised aerosol, UK shipment only |
FER01015R |
£12.95 |
|
| |
|
|
|
|
|
Cam Spares |
|
|
|
|
Front Cam Oil Seal Carrier
(348: All)
|
144973 |
£288.60 |
|
|
Cam Drive Retaining Bolt
(348: 2.7 Motronic, TB/S)
|
146540 |
£11.20 |
|
 |
Threaded Stud
Supersedes: 12354524
(348: All) |
13517121
|
£3.10 |
|
| |
|
|
|
|
|
Head gasket |
|
|
|
 |
Head Gasket
Elring
Supersedes: 134779
(348: 2.7 Motronic, TB/S) |
152029 |
£395.86 |
|
|
Head Gasket
Aftermarket
Supersedes: 134779
(348: 2.7 Motronic, TB/S)
|
152029/A |
£199.75 |
|
|
|
|
|
|
|
Cam cover gaskets |
|
|
|
|
Cam Cover Gasket Set
Without seals
(348: 2.7 Motronic, TB/S) |
34815070 |
£66.19 |
|
|
Cam Cover Gasket Set
With seals
(348: 2.7 Motronic, TB/S) |
34815075 |
£110.56 |
|
|
|
|
|
|
|
Cam Cover Gasket, left/front
With silicone bead
(348: 2.7 Motronic, TB/S) |
150084 |
£24.95 |
|
|
Cam Cover Gasket, right/rear
With silicone bead
(348: 2.7 Motronic, TB/S) |
150078 |
£24.95 |
|
|
Cam Cover Gasket, left/front
Supersedes: 150084, 132917
(348: 2.7 Motronic, TB/S) |
117264 |
£17.95 |
|
|
Cam Cover Gasket, right/rear
Supersedes: 150078, 132916
(348: 2.7 Motronic, TB/S) |
117263 |
£17.95 |
|
|
|
|
|
|
 |
End Plate Gasket, left & right
With Silicone Beading
Supersedes: 132918
(348: 2.7 Motronic, TB/S)
|
150075 |
£13.14 |
|
|
End Plate Gasket, left & right
2 required
Supersedes: 132918
(348: 2.7 Motronic, TB/S)
|
104694 |
£12.46 |
|
|
Distributor Blanking Plate Gasket
1 required
Supersedes: 133744
(348: 2.7 Motronic, TB/S)
|
150074 |
£4.95 |
|
|
Phase Sensor Gasket
1 required
Supersedes: 133745
(348: 2.7 Motronic, TB/S) |
150076 |
£6.49 |
|
|
|
|
|
|
|
Cam Shaft ‘O’ Ring
4 required
(348: 2.7 Motronic, TB/S) |
117275 |
£3.38 |
|
|
core plug |
|
|
|
 |
Aluminum Core Plug
Supersedes: 95184
(348: All) |
10269750 |
£1.26 |
|
|
Threaded Plug
14mm
(348: 2.7 Motronic) |
10269550 |
£2.43 |
|
|
|
|
|
|
|
End plate cover |
|
|
|
|
End Plate Cover, left & right
(348: 2.7 Motronic; TB/S)
|
103796 |
£281.04 |
|
|
|
|
|
|
| |
sprockets |
|
|
|
 |
Driven Gear
(348: 2.7 Motronic; TB/S) |
144489 |
£423.50 |
|
| |
|
|
|
|
|
Chain |
|
|
|
|
Timing Chain
(348: 2.7 Motronic; TB/S); (Mondial: T) |
132968 |
£78.41 |
|
|
|
|
|
|
|
dowel |
|
|
|
|
Cylinder Head Dowel
(348: 2.7 Motronic; TB/S) |
102725 |
£0.89 |
|
|
|
|
|
|
|
Oil seals |
|
|
|
|
Camshaft Oil Seal
Viton
Supersedes: 105055, 110314, 134714, 136526, 163987
(348: 2.7 Motronic, TB/S)
|
105389 |
£8.95 |
|
|
|
|
|
|
|
Phase Sensor Oil Seal
Original Style
Supersedes: 133064
(348: 2.7 Motronic, TB/S) |
149917/A |
£17.52 |
|
| |
|
|
|
|
| |
nuts, Washers and Screws |
|
|
|
 |
Screw
Supersedes: 10977611, 10977621
M5 x 12mm
(348: 2.7 Motronic, TB/S)
|
10977624 |
£0.05 |
|
|
CP Dome Nuts for Cam Covers. Pack of 10
As orginal chrome-plate on brass
Supersedes: 151230, 10044
|
24615170 |
£2.95 |
|
|
Cam Cover Washer, each
|
11197774 |
£0.07 |
|
|
Domed Cylinder Head Nut
(348: 2.7 Motronic, TB/S)
|
136269
|
£9.95 |
|
|
Exhaust Brass Locknut
M8 x 1.25
(348: 2.7 Motronic, TB/S)
|
138392 |
£0.89 |
|
|
Cylinder Head Washer
(348: 2.7 Motronic, TB/S)
|
136270 |
£3.50 |
|
|
Washer
8mm Outside Diameter
Supersedes: 10615370, 10615371, 10615379, 10615301, 10615376
|
149951 |
£0.24 |
|
 |
Timing Chain Guide Screw
Supersedes: 248334, 231616, 11567624, 14305720, 14305721
(348: 2.7 Motronic, TB/S)
|
14305724 |
£0.15 |
|
 |
M14 Spring Washer
|
M14WASH |
£0.27 |
|
 |
Washer
|
10519424 |
£0.02 |
|
 |
Washer
|
10615301 |
£0.14 |
|
 |
Cylinder Head Washer
(348: All) |
10519378 |
£0.06 |
|
|
|
|
|
|
| |
High Quality Yellow Nyloc nuts |
|
|
|
 |
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
 |
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
 |
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
 |
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
 |
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
 |
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
 |
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
 |
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
| |
|
|
|
|
|
|
|
|
|
