Clutch Parts for Ferrari 355



355 - Clutch Change gear smoothly with our range of clutch kits, including discs, pressure plates, thrust bearings, flanges and seals, or upgrade with one of our outstanding uprated clutch release bearings. You'll also find flywheels, bearings, fittings and oil seals here.

Clutch

355 Clutch And Pressure Plate Kit
Original Valeo
(355: 2.7 Motronic, 5.2 Motronic)

157754

£1388.08

355 Reconditioned Clutch Kit
(Please send us your old clutch, and we will recondition your clutch assembly)
(355: 2.7 Motronic, 5.2 Motronic)
This service is not currently available

157754R

£445.00

355 Clutch Plate
Italian
Manual Cars Only, not for F1 Shift

7315

£198.26

355 Clutch Centre Plate
Valeo
(355: 2.7 Motronic, 5.2 Motronic)

157756

£304.31

355 Clutch Thrust Bearing
Early type
Currently on manufacturer back order

7310

£89.60

Clutch Slave Flange and Bearing Kit
Kit Includes:
#CRBF-348-355M
#CRB-355MS

Valid up to gearbox Nr. 2438

Valid from gearbox Nr. 2439 and till Nr. 2715 for complete gearbox 168372 - Not for complete gearbox 174037

Latter 355's uses #158209 flange - This kit can not be used from transmission Nr. 2716 for complete gearbox 168372 and from Nr. 101 for complete gearbox 174037
(355: All)

177784

£1150.00

Clutch Slave Flange and Bearing Kit
Kit Includes:
#158209
#SK-15809
#CRB-355MS

For latter 355's using #158209 flange

Valid from transmission Nr. 2716 for complete gearbox 168372 and from Nr. 101 for complete gearbox 174037
(355: All)

158209-KIT01

£1195.00

Clutch Release Bearing Support Flange
#168589
Complete with 2 x Plugs #65928500
Can also be used to upgrade early 355's to use the later style clutch release bearings.
Supersedes: 138378, 144984, 173970, 177784
(355: 5.2 Motronic (Valid from gearbox Nr. 2439 and till Nr. 2715 for complete gearbox 168372 - Not for complete gearbox 174037))

CRBF-
348/355

£745.00

Clutch Slave Flange Seal Kit
(355: 5.2 Motronic (Valid from gearbox Nr. 2439 and till Nr. 2715 for complete gearbox 168372 - Not for complete gearbox 174037))

SK-CRBF-348/355

£35.00

Clutch Release Bearing Support Flange
Complete with 2 x Plugs #65928500
Can also be used to upgrade early 355's to use the later style clutch release bearings.
Supersedes: 138378, 144984, 173970, 177784
(355: 5.2 Motronic (Valid from transmission Nr. 2716 for complete gearbox 168372 and from Nr. 101 for complete gearbox 174037))

158209

£795.00

Clutch Release Bearing Flange Seal Kit
(355: 5.2 Motronic (Valid from transmission Nr. 2716 for complete gearbox 168372 and from Nr. 101 for complete gearbox 174037))

SK-158209

£26.00

Clutch Release Bearing Flange
Complete with 3 x Plugs #65928500
(355: F1)

173970

£840.00

Clutch Release Bearing Flange Seal Kit
(355: F1)

SK-173970

£32.00

Threaded Plug
(355: All)

65928500

£9.90

Clutch Release Bearing Flange Bushing
(355: 5.2 Motronic)

167525

£9.50

Clutch Release Bearing Flange Preload Spring
(355: 2.7 Motronic)

121717

£7.34

Clutch Release Bearing Flange Preload Spring
(355: 5.2 Motronic)

155207

£2.40

Roll Pin
(355: 2.7, 5.2 Motronic)

14163670

£0.57

Uprated Clutch Release Bearing with OEM seals
CRB-355MS should only be fitted with the later style flanges #168589.
An easy way to tell if you have this style flange is by measuring the spring hole centers shown in the diagram on the right. Early flanges have a dimension of 82mm while the later flange as shown has 86mm.
If you have the early-type flange, simply replace the flange with #CRBF-348-355M at the same time.
Supersedes: 168594 (without seals)
(355: Manual (Not to be used on Late 355 Models))

click to enlarge

CRB-355MS

£440.00

Clutch Release Bearing Seal Kit
To be used on CRB-355MS
(355: Manual (Not to be used on Late 355 Models))

SK-CRB-355-MS

£58.00

Uprated Clutch Release Bearing with OEM seals
#170183
Supersedes: 170182 (without seals)
(355: F1)

CRB-
355F1-S

£480.00

Clutch Stop Bolt
(355: F1)

166595

£26.50

Clutch Master Cylinder
Supersedes: 175211, 150067
(355: 2.7, 5.2 Motronic)

123416

£124.00

Clutch Master Cylinder Fixing Nut
(355: All)

177778

£1.09

Clutch Master Cylinder Union
Supersedes: 175188, 165032
(355: 2.7 Motronic, 5.2 Motronic)

184497

£14.77

Brake Fluid Feed Pipe Rubber
(355: 2.7, 5.2 Motronic)

175189

£12.54

Clutch Cover Bolt
Supersedes: 14305621
(355: 2.7 Motronic, 5.2 Motronic)

14305674

£0.15

Clutch Shaft Scraper Ring
(355: 2.7 Motronic, 5.2 Motronic)

138387

£6.43

Oil Seal (Clutch Bearing Carrier)
Supersedes: 131664
(355: 2.7 Motronic, 5.2 Motronic)

139438

£4.00

Oil Seal (Clutch Bearing Carrier)
Supersedes: 144989
(355: 2.7 Motronic, 5.2 Motronic)

151822

£16.31

Clutch Shaft Spring Clip
(355: 2.7 Motronic, 5.2 Motronic)

13398176

£1.84

Clutch Shaft Roller Bearing
Supersedes: 138340
(355: 2.7 Motronic, 5.2 Motronic)

131050

£86.23

Clutch Release Bearing Flange “O” Ring
(355: 2.7 Motronic, 5.2 Motronic)

121813

£0.40

Support Flange O Ring
(355: 2.7 Motronic, 5.2 Motronic)

166432

£0.15

Support Flange Gasket
(355: 5.2 Motronic, F1)

165466

£0.22

Clutch Release Bearing Pin O Ring
(355: 5.2 Motronic, F1)

165658

£5.78

Clutch Release Bearing Pin Plug
(355: 5.2 Motronic, F1)

167802

£33.80

Clutch Pipe Union Block
(355: 2.7 Motronic, 5.2 Motronic)

139375

£52.20

Clutch Hose
Aftermarket
(355: 2.7 Motronic, 5.2 Motronic)

155145/A

£169.26

Clutch Pipe Union
(355: 2.7 Motronic, 5.2 Motronic)

148604

£52.16

Clutch Hose Union
(355: Challenge 99)

169082

£5.32

Clutch Pedal Return Spring
(355: 2.7 Motronic, 5.2 Motronic)

101305

£50.92

Clutch Pedal Support Bush
(355: 2.7 Motronic, 5.2 Motronic (LHD Only))

112153

£2.85

Clutch Shaft Ring Nut
(355: 2.7 Motronic, 5.2 Motronic)

125480

£32.00

Clutch Hose
(355: 2.7 Motronic, 5.2 Motronic)

134903

£2.52

Clutch Bleed Pipe
(355: Challenge 99)

169081

£90.73

Clutch Release Bearing O Ring
(355: 5.2 Motronic)

170196

£14.56

Clutch Release Bearing Guide Shoe
(355: 5.2 Motronic)

170193

£1.20

Clutch Release Bearing Oil Seal
(355: 5.2 Motronic)

170194

£7.91

Clutch Release Bearing Oil Seal
(355: 5.2 Motronic)

170195

£5.69

P Clip Clamp 10mm
(355: All)

10440990

£1.13

Flywheel

355 Flywheel

159507A/B

£645.00

355 Flywheel Centre Bearing

35511002

£39.40

Flywheel Ring Gear
(355: 2.7 Motronic, 5.2 Motronic (F1 Gearboxes Only))

165594

£1093.55

Flywheel Nut
Use with tool RNT-60
Supercedes: 156826
(355: 2.7 Motronic, 5.2 Motronic)

168156

£65.00

Clutch Flywheel Bearing “O” Ring
(355: 2.7 Motronic, 5.2 Motronic)

104984

£0.90

Clutch Flywheel Centre 'O' Ring
(355: 2.7 Motronic, 5.2 Motronic)

35511003

£0.47

Unisilkon GLK 1301 Kluber Grease, 195g
Special requirement OEM Kluber flywheel grease as recommended by Ferrari to re-pack your 355 flywheel.
(355: 2.7 Motronic, 5.2 Motronic)

GLK1301

£69.88

Clutch Flywheel Spline Mount (Inc Rivets)

159507-100

£225.00

Bell Housing

Bell Housing Bearing
(Rear Of Flywheel)
(355: 2.7 Motronic, 5.2 Motronic)

136957

£150.39

Bell Housing Cover Screw
(355: 2.7 Motronic)

13813421

£5.71

Stud
Supersedes: 13543421
(355: 2.7 Motronic, 5.2 Motronic)

13543424

£1.58

Heat shield

RH Heat Shield
(355: Challenge 99)

153570

£141.21

LH Heat Shield
(355: Challenge 99)

153581

£141.21

Slave cylinder

Clutch Slave Cylinder Scraper Ring
(5.2 Manual Shift)
Supersedes: 172502
(355: 5.2 Motronic (Non-F1)
From gearbox 2439: for gearbox 168372
From 101 for complete gearbox 174037

176561

£7.91

Clutch Slave Cylinder Scraper Ring
Supersedes: 172500
(355: 5.2 Motronic (non-F1))
For Gearbox 168372: From no. 2439
For Gearbox 174037: From no. 101

176562

£14.17

Slave Cylinder Gasket And “O” Ring
Supersedes: 172501
(355: 5.2 Motronic (Non-F1)
From gearbox 2439: for gearbox 168372
From 101 for complete gearbox 174037

176563

£27.74

355 Slave Cylinder Slider
Pair
(355: 5.2 Motronic (Non-F1)
From gearbox 2439: for gearbox 168372
From 101 for complete gearbox 174037

172499

£3.48

Tools

Clutch Alignment Tool
Suitable for single & dual plate clutches.
(355: All)

CAT-348/355

£55.00

Flywheel Tool
60mm

RNT-60

£56.50

Spline Gauge for 355 Flywheel
This gauge has been specially made to check the wear on the female spline of the 355 flywheels. The female spline has a tendency to wear bell mouthed and thus caused extreme stress on the the male spline of the quill shaft. This stress will cause the quill shaft to break at one of the grooves for the triple seals - something that has been seen over many years and never full understood. We do not recommend fitting any new quill shaft (Hill Eng or OEM) without checking the wear of the flywheel spline first. If the NO GO end of the gauge enters the flywheel spline it will indicate that either a new flywheel will be necessary.
(355: All)

H01-03600

£165.00

Spigot shaft