Our silent bloc bush range has the following specifications:
- High grade SMR based natural rubber
- 68 and 85 shore hardness
- Tearing strength of 24MPa
- Rubber is bonded to inner and outer metal sections (it is not assembled unbounded), which means that inner and outer sections stay in position and do not migrate, and the metal sleeve does not rotate in the rubber.
- Zinc-plated or black-passivated to resist corrosion
- Cured at temperature and high pressure
|
|
|
|
|
|
|
SUSPENSION BUSHES: FRONT |
|
|
|
|
Front Suspension Bush Set
(348: TB/S) |
S348FS |
£296.51 |
|
|
8 x |
|
Upper & Lower Front Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(348: TB/S) |
|
154537 |
£27.60 |
|
2 x |
|
Front Anti Roll Bar 'D' Rubber
(348: TB/S) |
|
118371 |
£17.95 |
|
8 x |
|
Torsion Bar Rubber Front
Supersedes: 64430, 126097
(348: TB/S) |
|
100984 |
£6.77 |
|
|
|
Front Anti Roll Bar 'D' Rubber
Ø 22.5mm
(348: Challenge) |
153179 |
£39.95 |
|
|
High Quality Torsion Bar Bracket
Uprated: Stainless Steel
Supersedes: 239775
(348: All) |
133802 |
£12.95 |
|
|
Front Anti-Roll Bar Rubber Inner Bush
Supersedes: 64431
(348: TB/S) |
100985 |
£13.97 |
|
|
8mm Captive Bolt
(348: TB/S, GTB/S/C/Spider) |
14672491 |
£19.80 |
|
|
Front Suspension Fork
(348: All) |
142983 |
£248.64 |
|
|
|
|
|
|
|
SUSPENSION BUSHES: REAR |
|
|
|
|
Rear Suspension Bush Set
(348: TB/S) |
S348RS |
£534.01 |
|
|
8 x |
|
Upper Rear Wishbone Bush, inner & outer
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(348: TB/S) |
|
154537 |
£27.60 |
|
4 x |
|
Lower Rear Wishbone Bush, outer
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 120813
(348: TB/S) |
|
154538 |
£39.95 |
|
4 x |
|
Lower Rear Wishbone Bush, inner
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(348: TB/S) |
|
154539 |
£39.85 |
|
2 x |
|
Drop Link Silent Bloc
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
Supersedes: 60220, RIV 88.109.541
(348: TB/S) |
|
100773 |
£17.79 |
|
2 x |
|
Rear Torsion Bar ‘D’ Rubber
Ø 16.0mm
Supersedes: 640878
(348: TB/S) |
|
110874 |
£9.95 |
|
8 x |
|
Rear Suspension Drop Link Rubber
(348: TB/S) |
|
107335 |
£6.52 |
|
|
|
Rear Anti Roll Bar 'D' Rubber
Ø 16.5mm
(348: Challenge) |
153180 |
£39.95 |
|
|
High Quality Torsion Bar Bracket
Uprated: Stainless Steel
Supersedes: 239775
(348: All) |
133802 |
£12.95 |
|
|
Rear Anti Roll Bar Spacer for Rubbers
Supersedes: 107336, 154085
(348: All)
|
108294 |
£26.95 |
|
|
Rear Suspension Fork
(348: All) |
116690 |
£250.54 |
|
|
|
|
|
|
|
Powerflex teflon suspension bushes (trackday / fast road use) |
|
|
|
|
Upper Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(348: All) |
PF17-200 |
£32.95 |
|
|
Lower Front Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(348: All) |
PF17-200 |
£32.95 |
|
|
Upper Rear Outer Wishbone Bush
Uprated: Polyurethane
Powerflex
(348: All) |
PF17-200 |
£32.95 |
|
|
Upper Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(348: All) |
PF17-200 |
£32.95 |
|
|
Lower Rear Inner Wishbone Bush
Uprated: Polyurethane
Powerflex
(348: All) |
PF17-110 |
£21.95 |
|
|
|
|
|
|
|
Shock absorbers |
|
|
|
|
Front Shock Absorber, each
Koni
(348:2.7 Motronic, TB/S) |
146290 |
£457.84 |
|
|
Rear Shock Absorber, each
Koni
(348:2.7 Motronic, TB/S) |
146291 |
£456.52 |
|
|
Rear Shock Absorber, each
Sold in pairs only
Currently on Manufacturer Back Order
(348:
TB/S (Italian & German versions: from car 13560)
TB/S (All other versions: from car 13921),
Spider (USA)) |
155188 |
£271.36 |
|
|
Front & Rear Shock Absorber Bush
High Quality: Superformance bushes use high grade rubber designed for maximum absorption that is bonded (not pressed) to the non rotating parts. The centre pins are ground on a centreless grinder to obtain a precise fit.
(348: TB/S)
|
130516 |
£22.74 |
|
|
Front & Rear Shock Absorber Top Mount
(348: TB/S) |
114812 |
£58.80 |
|
|
Top Mount Washer
2 required per mount
(348:2.7 Motronic, TB/S) |
114815 |
£1.56 |
|
|
Retainer Nut for Shock Absorbers
(348: TB/S) |
141860 |
£44.00 |
|
|
Retainer Nut for Shock Absorbers
Spring Perch
(348: TB/S) |
155086
|
£48.60 |
|
|
Lower Suspension Spring Rubber
Per shock absorber
(348: All) |
113581 |
£11.95 |
|
|
Upper Suspension Spring Rubber
Per shock absorber
(348: All) |
113582 |
£39.95 |
|
|
|
|
|
|
|
Wishbone |
|
|
|
|
Lower Rear Wishbone
(348: All) |
136185 |
£638.53 |
|
|
|
|
|
|
|
Ball joints |
|
|
|
|
Upper Ball Joint
(348: TB/S) |
132776/A |
£76.00 |
|
|
Lower Ball Joint
Supersedes: 114462, 101442, 154536, 640427, 641487
(348: TB/S)
|
133944 |
£78.08 |
|
|
Ball Joint Rubber |
24608155 |
£11.60 |
|
|
Ball Joint Nut
1 req. per ball joint (4 req. per car)
Supersedes: Ehrenrejch 035.0145.044.506
(348: TB/S) |
149807 |
£0.61 |
|
|
Ball Joint Washer |
122237 |
£3.17 |
|
|
|
|
|
|
|
Shims |
|
|
|
|
Shim |
|
|
|
1.0mm |
101039 |
£1.35 |
|
1.5mm |
107338 |
£1.35 |
|
2.0mm |
107339 |
£1.35 |
|
2.5mm |
107340 |
£1.35 |
|
3.0mm |
107341 |
£1.35 |
|
|
|
|
|
|
|
Lower Ball Joint Shim |
|
|
|
1.0mm |
164484 |
£2.20 |
|
1.2mm |
115073 |
£1.75 |
|
1.5mm |
101022 |
£1.75 |
|
2.0mm |
164485 |
£1.75 |
|
|
|
|
|
|
|
Hub |
|
|
|
|
Front Wheel Hub
(Including Ball Bearing)
(348: TB/S (from car no. 8799))
|
142882 |
£1057.03 |
|
|
Rear Hub And Bearing Assy
Supersedes: 143172
(348: TB/S (from car no. 8799)) |
157900 |
£964.18 |
|
|
Rear Hub Cover Ring
(348: All) |
103117 |
£54.01 |
|
|
Front Hub Shaft Pin
(348: TB/S) |
13909870 |
£0.39 |
|
|
Hub Nut
(348: TB/S (until car no. 8798)) |
124642 |
£9.95 |
|
|
|
|
|
|
|
Wheel bearings |
|
|
|
|
Front Wheel Bearing
(348: TB/S (until car no. 8798)) |
112799 |
£363.21 |
|
|
Inner & Outer Rear Wheel Bearing
2 required
Supersedes: 125935
(348: TB/S (until car no. 8798)) |
144807 |
£86.28 |
|
|
Rear Wheel Oil Seal
(348: TB/S (until car no. 8798)) |
131768 |
£17.28 |
|
|
Front Wheel Bearing Stay Bolt Washer
(348: TB/S (until car no. 8798)) |
124464 |
£15.88 |
|
|
Front Wheel Bearing Inner Shield
(348: TB/S (until car no. 8798)) |
131279 |
£48.74 |
|
|
Front Wheel Bearing Outer Shield
(348: TB/S (until car no. 8798)) |
112823 |
£39.83 |
|
|
|
|
|
|
|
Suspension Nuts & Bolts |
|
|
|
|
|
Upper & Lower Front Wishbone Bush Bolt
(348: All) |
106419 |
£13.48 |
|
|
Upper & Lower Inner Front Wishbone Bush Nut
(348: All) |
148020 |
£1.74 |
|
|
|
|
|
|
|
Upper Front Ball Joint Bolt
(348: All) |
16043724 |
£0.15 |
|
|
Upper Front Ball Joint Nut
(348: All) |
104030 |
£0.19 |
|
|
|
|
|
|
|
Lower Front Ball Joint Bolt, Outer
(348: All) |
15971624 |
£0.61 |
|
|
Lower Front Ball Joint Nut
(348: All) |
102742 |
£0.28 |
|
|
Lower Front Ball Joint Bolt, Inner
(348: All) |
132667 |
£5.15 |
|
|
Lower Front Ball Joint Nut, Outer
Supersedes: 95900617, 102825
(348: All)
|
M12NUT |
£0.38 |
|
|
Front/Rear Hub Nut
Supersedes: 148851, 186712
(348: TB/S (from car no. 8799)) |
209184/A |
£24.19 |
|
|
Suspension Bolt
(348: All) |
132665 |
£22.94 |
|
|
|
|
|
|
|
|
Upper Rear Wishbone Bush Bolt
(348: All) |
106419 |
£13.48 |
|
|
Upper Rear Wishbone Bush Washer
Supersedes: 12601574
(348: All) |
106616
|
£0.89 |
|
|
Upper Rear Wishbone Bush Nut
(348: All) |
148020 |
£1.74 |
|
|
Lower Rear Fork Bolt
(348: All) |
106422 |
£23.27 |
|
|
Lower Rear Fork Washer
(348: All) |
148423 |
£0.83 |
|
|
|
|
|
|
|
Upper Rear Wishbone Mounting Bolt
(348: All) |
128904 |
£18.31 |
|
|
Upper Rear Wishbone Mounting Washer
(348: All) |
12601571 |
£0.06 |
|
|
Upper Rear Wishbone Mounting Nut
Supersedes: 95900617, 102825
(348: All)
|
M12NUT |
£0.38 |
|
|
|
|
|
|
|
Lower Rear Wishbone Mounting Bolt
(348: All) |
136218 |
£23.56 |
|
|
Lower Rear Wishbone Mounting Washer
(348: All) |
105434 |
£21.94 |
|
|
Lower Rear Wishbone Mounting Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
Supersedes: 150238
(348: All)
|
M14NUT |
£0.42 |
|
|
Front/Rear Hub Nut
Supersedes: 148851, 186712
(348: TB/S (from car no. 8799)) |
209184/A |
£24.19 |
|
|
Rear Anti Roll Bar Nut
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
Supersedes: 16104425, 147985
(348: All)
|
M8NUTSTD |
£0.24 |
|
|
|
|
|
|
|
Lock nut |
|
|
|
|
Shock Absorber Lock Nut Spanner
(348: All) |
LNS-01 |
£49.50 |
|
|
Platform Adjuster
110mm Diameter
(348: All) |
LNS-01-A |
£49.50 |
|
|
|
|
|
|
|
lock nuts |
|
|
|
|
Rear Hub Shaft Lock Nut
44mm
Use with tool RNT-44
Supersedes: 522670, 700648
(348: TB/S (until car assy. 8798)) |
102289 |
£28.45 |
|
|
Hub Shaft Ring Nut Tool
44mm |
RNT-44 |
£56.50 |
|
|
|
|
|
|
|
Anti Roll BAr |
|
|
|
|
Anti Roll Bar Washer
(348: 2.7 Motronic, TB/S) |
105334 |
£6.95 |
|
|
Roll Bar Bracket
(348: GTB/GTS/GTC, Spider, TB/S) |
239775 |
£17.97 |
|
|
Rear Anti-Roll Bar Washer
(348: 2.7 Motronic, TB/S) |
117285 |
£0.98 |
|
|
|
|
|
|
|
MIsc Nuts, Bolts & Washers |
|
|
|
|
Stud
Supersedes: 13543521
|
13543524 |
£3.80 |
|
|
M14 Spring Washer
|
M14WASH |
£0.27 |
|
|
Washer
|
10519424 |
£0.02 |
|
|
Washer
8mm Hole
Valid till Car Ass. Nr. 8310
Currently on manufacturer back order
(348: TB/S)
|
113113 |
£4.35 |
|
|
Washer
|
10615301 |
£0.14 |
|
|
|
|
|
|
|
High Quality Yellow Nyloc nuts |
|
|
|
|
7mm Spanner Size Nut
M4 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M4NUT |
£0.23 |
|
|
10mm Spanner Size Nut, Standard
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTSTD |
£0.24 |
|
|
10mm Spanner Size Nut, Tall
M6 x 1mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M6NUTTALL |
£0.28 |
|
|
13mm Spanner Size Nut, Standard
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTSTD |
£0.24 |
|
|
13mm Spanner Size Nut, Tall
M8 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M8NUTTALL |
£0.29 |
|
|
17mm Spanner Size Nut
M10 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M10NUT |
£0.34 |
|
|
19mm Spanner Size Nut
M12 x 1.25mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M12NUT |
£0.38 |
|
|
22mm Spanner Size Nut
M14 x 1.5mm nyloc nut
High quality yellow nyloc nut, made to replace original OEM parts fitted in period.
|
M14NUT |
£0.42 |
|
|
|
|
|
|
|
|
|
|
|